F003L21A033 AnthraciteBellhop Pole with base H 4020 mm Non Dimmable
Designed by Edward Barber and Jay Osgerby, 2018
220-240V power supply included. Ready for installation on solid surface. Base plate available as accessory. Each luminaire is equipped with 200 mm cable for connection inside the luminaire body. Reccomended connection wit a 2 way terminal block 4 poles IP68 H2O Stop, to be ordered separately. 110V and dimmable versions available on request.
30W - 2490lm - 2700K - CRI> 80 - Beam° 93
Technical Drawing
Main specifications
Schematic light drawing
Photometric
Electrical
Physical
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.
For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges
These effects are frequently caused by:
• over voltage coming from the mains’ network where fixture is connected.
• electrostatic discharge (ESD) coming from the environment.
The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
Photometric Files
Technical Drawings
Ecodesign and Energy Labelling
Replaceable (LED only) light source by a professional
Replaceable control gear by a professional
